For a quarter century, 300 mm capacity Bandit® Model 150XP disc-style hand-fed chippers have served tree care professionals and municipalities around the world. The Bandit Model 150XP Chipper is Bandit’s most compact 300 mm disc chipper, featuring a 430 x 360 mm chipper throat opening and dual feed wheels mounted in Bandit’s proven Slide Box Feed System, providing direct down pressure to easily pull in, crush and compress brush, large limbs, and small trees with minimal trimming required.
The Bandit Model 150XP Wood Chipper is the perfect machine for rental companies and governmental agencies looking for a compact 300 mm capacity chipper. These units have powerful feed systems with large hydraulic motors that will pull whole trees into the chipper and easily compress limby material, limiting the need to trim.
Key Features and Options
Extremely Easy To Service And Maintain
The chipper hood opens making it easy to get at the blades. Bolt-in blades are easy to change and reversible with two usable edges before the blades need to be sharpened. Blades may be able to be sharpened up to five or six times before disposal. All grease points are easy to reach, and all other service areas are easy to access.
High Velocity Discharge
Smooth transitions from the chipper housing to the discharge spout eliminate hang-ups that can plug the chipper or slow the discharge velocity of the chips. This transition, along with proprietary disc designs, combine to discharge chips at maximum velocity.
The engine provides all of the power to run the chipper and the hydraulic functions of the chipper. Because Bandit offers such a wide variety of engine options from all of the major engine suppliers, the customer can select the power unit that best suits the operator’s specific needs from a performance standpoint as well as a service standpoint.
Powerful Dual Feed Wheel System
Bandit’s Model 150XP Chippers are equipped with two horizontal 430 mm wide by 190 mm diameter hydraulic feed wheels and with 400 mm3 hydraulic motors. The powerful dual wheel feed system makes it easy to chip large diameter material and multiple stems. Housed in Bandit’s patented Slide Box Feed System, the feed wheels provide direct down pressure to help pull in and compress large limby material that would otherwise require extra trimming before processing.
Bandit® Model 150XP Disc Style Hand-Fed Wood Chipper Specifications
Machine weights, feed rates, and other specifications are approximate and will vary depending on options selected. All specifications are subject to change.
|Capacity:||300 mm||300 mm|
|Opening:||430 x 360 mm||430 x 360 mm|
|Width:||1.8 m||1.8 m|
|Height:||2.4 m||2.5 m|
|Length (open):||5.1 m||5.6 m|
|Length (closed):||4.4 m||4.8 m|
|Weight:||2.5 ton||2.6 ton|
|Feed Rate:||27 m/min||–|
|Fuel Tank:||110 liters||–|
|Hydraulic Tank:||50 liters||50 litres|